VIOLIN FINGERING TAPE:
- To assist beginning violinists, some violin teachers use thin strips of colored tape (e.g. 1/8" graphic chart tape or pinstripe auto detailing tape) to mark where students should place their fingers on the violin fingerboard. Other varieties of tapes used include commercial musical instrument tape, circle sticker dots, or masking, painting, vinyl or electrical tape (cut to the desired thickness). Once beginners know where to place their fingers, the tape is removed. If a sticky residue is left, an instrument cleaner may be used to clean the fingerboard. If the residue is difficult to remove, isopropyl alcohol can be used to clean the fingerboard (do not let the alcohol touch the instrument varnish or it can cause significant damage).
- The tape is often used to mark a regular 1st finger (such as the note B on the A string), high 2nd finger (e.g. C# on the A string), third finger (e.g. the note D on the A string), and 4th finger (e.g. the note E on the A string -- sounds the same as open E).
- Rather than use precise measurements to place fingering tape, it's best to place the tape by ear (after placing each piece of tape, press your finger down on the tape and listen carefully to determine whether or not the note sounds in tune). This is due to the fact that variations in the width and shape of each person's finger may affect where each tape should be placed. It's also important to remember that although fingering tape can provide beginners with an approximate location of where they should place their fingers, playing in tune requires the violinist to listen carefully to make sure they are playing the correct pitch. Fingering tape should be used as a temporary aid, not as a long term solution.
VIOLIN FINGERBOARD CHART:
- A chart of the violin fingerboard is provided in the image at the top right of this page. Fingering for notes played in the 1st position can be found to the right of the fingerboard. Most violin music for beginners uses only the 1st position.
- Fingering for notes played in the 3rd position can be found to the left of the fingerboard. These notes require the violinist to "shift" the position of their hand to a higher position on the keyboard in order to play these notes. For an explanation of shifting, visit the Shifting & Positions page.
- The fingerboard chart shows many instances of two musical letters being placed on the same space. This indicates those two notes are enharmonic, meaning, even though they are named or "spelled" differently, they sound the same pitch. For example, in the first position on the A string, D# and Eb have the same sound (and are enharmonic notes). This note could be fingered using either a high 3rd finger, or a low 4th finger. The pitch would be the same.
- All variations of notes and fingerings in higher positions were not labeled and shown (the entire length of the fingerboard can be used to finger and play notes).
© Copyright 2015 RK Deverich. All rights reserved.